About Us | Catalog | Emails Us | Our Social Media: Facebook | Instagram | Youtube


    Back To Home

    Airless Sprayer GEROMAC GUIDE

    Airless paint sprayers ensure paint contractors high material processing capacity and productivity. Choosing the right airless sprayer can be a tricky decision for any contractor.

    How to choose an airless paint sprayer

    First of all, we need to understand why to use an airless paint sprayer, what advantages does a paint sprayer offer contractors and what size of airless sprayer is suitable for each average contracting job.

    Minimal material waste is probably one of the most important facts of using an airless paint sprayer. In most cases and especially on a heavy duty airless paint sprayer, you will find a double method of material suction, so for example when spraying paint you can use a suction hose and with thicker materials you would work with a direct immerse pump. With these material input methods and the atomization procedure, you have already gained material therefor money.

    Airless paint sprayers offer faster coverage than a roller or a brush application. With a sprayer it is easier to apply paint to a large variety of surfaces (walls, ceilings, indoor – external coatings, floors etc.) By adding accessories to your sprayer, you can reach high and inaccessible surfaces, increasing your productivity and saving time & cost.
    Airless sprayers have a paint pump that pushes the material into a paint hose and out from a spray gun, at the output of the airless spray gun you will find a guard and a spray tip. The spray tips come in a large variety of sizes depending of the application and the desired fan pattern.
    All airless spray tips have a three digit size guide for example 529.
    The first digit indicate the width of the spray distribution or commonly the fan size, so in the above example the digit 5 – therefore you will be spraying at an angle of 50°.

    a) The second and third digits of the tip size indicate the size of the spray orifice, for example 29  matches an orifice of 0.029 inch or 0.736mm.

    Tip flow rate:

        • The flow rate of the tip depends on several factors, among them:
        •       The airless sprayers pressure psi/bar

         b) The used spray material

    Higher the working pressure = higher flow

    Always check your airless sprayer’s technical specifications before choosing an airless tip spray.

    So now we have seen some basic facts of airless paint sprayers, we need to ask ourselves what size of sprayer fits my average coating job needs.

    A few important questions are:

    - Power = HP ?

    Professional airless paint sprayer may be found either with electric motors or gas powered engines. So know the job site power source or you can always choose a convertible power airless sprayer.

    - Average project size?

    Think about your average jobs that you take on or bid, you don’t want to land up with a small unit that will limit your coating operation. If you most commonly work with commercial coatings and larger surfaces then a larger heavy duty airless sprayer may be appropriate for you. On the other hand if in average your painting jobs are small or housing renovations then a less powerful sprayer is probably ideal for you.

          - What materials to you apply?

    A large variety of materials may be sprayed with airless sprayers; therefor you need to be sure that the working pressure of your sprayer is appropriate for the material. For example if you are spraying heavy texture then you definitely need a high-pressure airless sprayer, always consult your material supplier of the psi / bar needed to spray the material.

          - Volume of coating - pricing

    Once again, when purchasing a paint sprayer you must take into consideration the payback time of this investment, you don’t want to land up spending more than you can afford.

          - Number of spray guns?

    How many users / how many simultaneously spraying? Heavy duty airless sprayers give you the opportunity to have multiple users spraying in order to get larger jobs done faster. Keep in mind that some spraying equipment can handle only one spray gun. This always depends on the contractor’s requirement per average jobs and time schedule.

    Sign up to newsletter

    Sign up here to get the latest news & updates!

    GEROMAC offers a professional range of hydraulic and airless paint systems, designed for residential and commercial contractors that want to get the best out of their painting equipment. GEROMAC stands next to its end-users by designing cost effective machinery intended for the tough construction site. Within GEROMAC’s product range you will find hydraulic airless electric paint sprayers from 2.5-4.0 HP, airless gas sprayer powered with Honda GX engines 4.8-5.5 HP, pneumatic pumps and line striping machines with 1 or 2 guns and a complete series of airless accessories to complete your businesses professional equipment.